As of
2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015
- Katsushi Furutani, Takahiro Tsuchiya:
Force-Controlled Electrode Holder for Lathe-Type Electrochemical Discharge Machine,
Proceedings of 36th Annual Meeting of American Society for Precision
Engineering, Online (Minneapolis, Minnesota, USA), pp. 294-297 (2021).
Go to top
- Katsushi Furutani, Haruki Okamura, Tatsuaki Okada, Kazuto Saiki, Hiroyuki Ohue:
Machining Characteristics of Rock by Wire-Sawing in Vacuum at High Cutting-Load,
Proceedings of 35th Annual Meeting of American Society for Precision
Engineering, Online, pp. 210-213 (2020).
Go to top
- Katsushi Furutani, Ryota Inukai, Tatsuaki Okada, Kazuto Saiki, Hiroyuki Ohue:
Experimental Analysis of Nickel Adhesion Process during Wire-sawing of Rock in Vacuum by Friction Test,
Proceedings of 34th Annual Meeting of American Society for Precision Engineering,
Pittsburgh, Pennsylvania, USA,
pp. 431-434 (2019)
- Katsushi Furutani, Junichi Haruyama: Investigation of Machining Methods of
Rock Samples in Lunar Vertical Holes and Lava Tube 9or UZUME Project, Proceedings of
50th Lunar and Planetary Science Conference, The Woodlands, Texas, USA, 1170,
2 p. (2019).
Go to top
- Katsushi Furutani, Ryota Inukai, Takayoshi Takano, Tatsuaki Okada, Kazuto
Saiki, Hiroyuki Ohue: Estimation of Saw Wire Temperature during Machining of
Rock in Vacuum, Proceedings of 33rd Annual Meeting of American Society for
Precision Engineering, Las Vegas, Nevada, USA, pp. 273-276. (2018).
Go to top
- Katsushi Furutani, Takahiro Tsuchiya, Hiroki Yamagishi: Fundamental Experiments
of Additive Manufacturing Method by Selective Solidification Using Electircal
Discharge, Charlotte, North Carolina, USA, pp. 543-546 (2017)..
- Katsushi Furutani, Yusuke Nakamura, Akira Urita: Non-contact transfer method
of thin plate using multiphase air flow, Proceedings of euspen’s 17th International
Conference and Exhibition, Hannover, Germany, pp. 425-426 (2017)
.
Go to top
- Katsushi Furutani, Kazuki Nomura, Tatsuaki Okada, Kazuto Saiki, Hiroyuki
Ohue: Effect of saw wire surface texture on slicing performance of rock
in vacuum, Proceedings of euspen's 16th International Conference and Exhibition,
Nottingham, UK, P9.01 (2016).
- Katsushi Furutani, Shunsuke Kojima: Prototyping of Acceleration Sensor
by Using Lathe-type Electro-chemical Discharge Machine, Procedia CIRP,
42, pp. 772-777 (2016); Proceedings of 18th CIRP Conference on Electro Physical and Chemical
Machining (ISEM XVIII), Tokyo, Japan
- Katsushi Furutani, Hisashi Kamiishi: Surface Crusher Driven with Solenoid by Planer Motion for Lunar Exprolation,
Proceedings of 47th Lunar and Planetary Science Conference, The Woodlands, Texas, USA, #1232 (2016).
Go to top
- Katsushi Furutani, Ryota Inukai, Sze Keat Chee, Takeshi Yano, Toshiro Higuchi:
Force Estimation Method of Piezoelectric Actuator by Using Driving Current,
Proceedings of 30th Annual Meeting of American Society for Precision Engineering,
Austin, Texas, USA, pp. 280-284 (2015).
- Junichi Haruyama, Isao Kawano, Takashi Kubota, Masatsugu Otsuki, Hiroki
Kato, Toshihiko Nishibori, Takahiro Iwata, Yukio Yamamoto, Yoshiaki Ishihara,
Aiko Nagamatsu, Kazuto Shimada, Toshiaki Hasenaka, Tomokatsu Morota, Masaki
N. Nishino, Ko Hashizume, Kazuto Saiki, Motomaro Shirao, Goro Komatsu,
Nobuyuki Hasebe, Hisayoshi Shimizu, Hideaki Miyamoto, Kensei Kobayashi,
Shinichi Yokobori, Tatsuhiro Michikami, Satoru Yamamoto, Yasuhiro Yokota,
Hitoshi Arisumi, Genya Ishigami, Katsushi Furutani, Yuichi Michikawa: Mission
Concepts of Unprecedented Zipangu Underworld of the Moon Exploration (UZUME)
Project, Proceedings of 30th International Symposium on Space Technology
and Science, Kobe, Japan, 2015-k-29, p. 4 (2015).
- Katsushi Furutani: Concept of Inflatable Rover for Exploration of Lunar
and Planetary Holes and Subsurface Caverns, Proceedings of 30th International
Symposium on Space Technology and Science, Kobe, Japan, 2015-k-34, p. 6
(2015).
Go to top
論文リストへ
by Katsushi
Furutani