As of
2010 | 2009 | 2008
- Katsushi Furutani, Hiroyuki Shintani, Yasuo Murase, Shuichi Arakawa: Measurement
of Current in Electro-chemical Discharge Machining by Forced Discharge
Dispersion, Proceedings of 2010 Annual Meeting of American Society for
Precision Engineering, Atlanta, Georgia, USA, pp. 356-359 (2010)
- Katsushi Furutani, Taizo Makino: Tweezers for Micromanipulation with Grasp
Detection of Small Object, Proceedings of ASME 2010 International Design
Engineering Technical Conferences & Computers and Information in Engineering
Conference, Montreal, Quebec, Canada, DETC2010-28229, pp. 1-7 (2010)
- Katsushi Furutani, Taizo Makino: Micromanipulation Applying Local Machining
Station Method, Proceedings of 2010 IEEE/ASME International Conference
on Advanced Intelligent Mechatronics, Montreal, Quebec, Canada, pp. 1023-1028
(2010)
- Makiko Ohtake, Chikatoshi Honda, Horohisa Kurosaki, Kazuto Saiki, Takamitsu
Sugihara, Hisashi Ootake, Tomokatsu Morota, Takashi Kubota, Katsushi Furutani,
Tatsuaki Okada:Hyper-spectral macro camera proposed for the SELENE-2 mission,
Proceedings of 38th COSPAR (Committee on Space Research) Scientific Assembly,
Bremen, Germany, B01-0017-10 (2010).
- Katsushi Furutani, Daisuke Hiraoka, Yasuo Murase, Kouzou Takeda: Electrode
Feeding Device for Micro-hole Electrical Discharge Machining by Using AZARASHI
Mechanism, Proceedings of 10th International Conference of the European
Society for Precision Engineering & Nanotechnology, Delft, The Netherlands,
pp. 441-444 (2010)
Go to top
- Katsushi Furutani, Koji Suzuki: A Desktop Saw Wire Coating Machine by Using
Electrical Discharge Machining, Proceedings of 2009 IEEE International
Conference on Control and Automation, Christchurch, New Zealand, pp. 2165-2170
(2009)
- Katsushi Furutani, Taizo Makino: Application of AZARASHI (Seal) Positioning
Mechanism to Micromanipulation by Vacuum Suction, Proceedings of 2009 IEEE
Symposium on Optomechatronic Technologies, Istanbul, Turkey, pp. 65-70
(2009)
- Katsushi Furutani, Yasuo Murase, Hiroyuki Shintani, Shuichi Arakawa: Machining
performance of electro-chemical discharge machining by forced discharge
dispersion, Prodeedings of 9th International Conference of European Society
for Precision Engineering and Nanotechnology, San Sebastian, Spain, pp.
138-141 (2009)
- Katsushi Furutani, Eiji Ikeda, Tatsuaki Okada, Kazuto Saiki, Hiroyuki Ohue:
Prototype of Cutting Machine by Wire-sawing in Vacuum for In-situ Investigation
of Rocks, Proceedings of 40th Lunar and Planetary Science Conference, The
Woodlands, Texas, USA, 1044, pp. 1-2 (2009)
Go to top
- Taizo Makino, Katsushi Furutani: Driving Method of Piezoelectric Actuators
with Matrix Circuit, Proceedings of 3rd International Conference on Positioning
Technology, Hamamatsu, Shizuoka, Japan, pp. 23-28 (2008)
- Masataka Ono, Katsushi Furutani: The Influence of the load on the displacement
of piezoelectric actuator with current pulse drive, Proceedings of 3rd
International Conference on Positioning Technology, Hamamatsu, Shizuoka,
Japan, pp. 29-34 (2008)
- Katsushi Furutani, Michiaki Tomoto: Combination Machining of Wire-sawing
with Electro-chemical Discharge Machining, Proceedings of 23rd Annual Meeting
of American Society for Precision Engineering and 12th International Conference
on Production Engineering, Portland, Oregon, USA, pp. 506-509 (2008)
- Katsushi Furutani, Atsushi Furuta: Comparison of Driving Performance of
Piezoelectric Actuator - Current Pulse Drive and Voltage Linear Drive -,
Proceedings of 7th International Conference on Machine Automation (ICMA
2008), Awaji, Japan, pp. 155-158 (2008)
- Katsushi Furutani, Hideaki Isono: Performance of AZARASHI (Seal) Positioning Mechanism with Friction Control by Inertial Force,
Proceedings of 11th International Conference on New Actuators (Actuator 2008), Bremen, Germany, pp. 997-1000 (2008)
- Katsushi Furutani, Koji Suzuki: Machining Conditions for Fabrication of
Wire Saw by Electrical Discharge machining by Using Green Compact Electrode,
Proceedings of the 10th euspen International Conference, Zurich, Switzerland,
pp. 184-187 (2008)
- Katsushi Furutani, Atsushi Furuta: Evaluation of Driving Performance of
Piezoelectric Actuator with Current Pulse, Proceedings of 10th IEEE International
Workshop on Advanced Motion Control, Trento, Italy, pp. 387-392 (2008)
Errata
Go to top
論文リストへ
by Katsushi
Furutani