中国足球彩票

图片

Proceedings 2002-2004

As of 07/14/2022

2004 | 2003 | 2002


<2004>

  1. Katsushi Furutani, Michio Suzuki: Machining Characteristics with Nanometer-cutting Machine Equipped Parallel Mechanism, Proceedings of 19th Annual Meeting of American Society for Precision Engineering, Orlando, Florida, USA, pp. 590-593 (2004)
  2. Yoshitaka Mieda, Katsushi Furutani: Two Dimensional Miro Manipulation Using Liquid Crystals, Proceedings of 2004 IEEE/LEOS International Conference on Optical MEMS and Their Applications, Takamatsu, Kagawa, Japan, pp. 86-87 (2004)
  3. Katsushi Furutani, Katsumi Kawagoe, Yoshitaka Mieda: Reduction of Straightness Error of L-shaped Seal Mechanism for Precision Positioning, Proceedings of 7th International Conference on Motion and Vibration Control, St. Louis, Missouri, USA, pp. 36/1-10 (2004)
  4. Noriyuki Ohta, Katsushi Furutani, Yoshitaka Mieda: Displacement Monitoring of Stacked Piezoelectric Element by Observing Induced Charge, Proceedings of the 1st International Conference on Positioning Technology, Hamamatsu, Shizuoka, Japan, pp. 361-366 (2004)
  5. Katsushi Furutani: Electrical Conditions of Electrical Discharge Machining with Powder Suspended in Working Oil for Titanium Carbide Accretion Process, Proceedings of International Conference on Precision Engineering (ICoPE03/04), Singapore, pp. 532-538, p. 545 (2004)

Go to top


<2003>

  1. Katsushi Furutani, Yousuke Shimizu: Experimental Analysis of Deposition Process of Lubricant Surface by Electrical Discharge Machining with Molybdenum Disulfide Powder Suspended in Working Oil, Proceedings of 2003 Annual Meeting of American Society for Precision Engineering, Portland, Oregon, USA, pp. 547-550 (2003)
  2. Katsumi Kawagoe, Katsushi Furutani: Fine Motion Performance of L-shaped Seal Mechanism with 3 Degrees of Freedom, Proceedings of 2003 Annual Meeting of American Society for Precision Engineering, Portland, Oregon, USA, pp. 227-230 (2003)
  3. Katsumi Kawagoe, Katsushi Furutani: Influence of Friction Force on Seal Mechanism with One Degree of Freedom, Proceedings of 2003 International Symposium on Micromechatronics and Human Science, Nagoya, Japan, pp. 317-322 (2003).
  4. Katsushi Furutani, Hiroshi Tachi, Mitsuru Saito: Linear Type Measuring Machine for Characteristic Evaluation of Leg, Proceedings of 4th International Symposium on Linear Drives for Industry Applications, Birmingham, UK, pp. 493-496 (2003).

Go to top


<2002>

  1. Katsushi Furutani, Hirotaka Sunada: Fabrication of Grinding Wheel with Dispersed Hard Powder by Electrical Discharge Machining, Proceedings of 17th Annual Meeting of American Society for Precision Engineering, St. Louis, Missouri, USA, pp. 638-641 (2002)
  2. Katsushi Furutani, Noriyuki Ohguro, Nguyen Trong Hieu, Takashi Nakamura: In-process Measurement of Topography of Grinding Wheel by Using Hydrodynamic Pressure, Proceedings of 17th Annual Meeting of American Society for Precision Engineering, St. Louis, Missouri, USA, pp. 332-337 (2002)
  3. Katsushi Furutani, Katsumi Shiraki: Deposition of Lubricant Layer during Finishing Process by Electrical Discharge Machining with Molybdenum Disulfide Powder Suspended in Working Fluid, Proceedings of JSME/ASME International Conference on Materials and Processing 2002, Honolulu, Hawaii, USA, 2, pp. 468-473 (2002)
  4. Katsushi Furutani, Nguyen Trong Hieu, Noriyuki Ohguro, Takashi Nakamura: In-process Compensation for Grinding Wheel Wear Based on Pressure Measurement by Zero Method, Proceedings of 6th International Conference on Mechatronics Technology, Kitakyushu, Japan, pp. 58-63 (2002)
  5. Katsushi Furutani, Michio Suzuki, Katsumi Kawagoe: Application of Parallel Mechanism to Nanometer Cutting Machine, Proceedings of the sixth International Conference on Motion and Vibration Control, Saitama, Japan, 2, pp. 777-782 (2002)
  6. Katsushi Furutani, Nguyen Trong Hieu, Noriyuki Ohguro, Takashi Nakamura: Automatic Compensation for Wear of Grinding Wheel by Pressure Based In-process Measurement in Wet Grinding, Proceedings of 2002 Japan-USA Symposium on Flexible Automation, Hiroshima, Japan, 1, pp. 453-458 (2002)
  7. Katsushi Furutani, Noriyuki Ohta: Positioning Performance of L-shaped Seal Mechanism with 3 Degrees of Freedom, Proceesings of 2002 IEEE International Conference on Robotics and Automation, Washington, D. C., USA, pp. 3660-3665 (2002)

Go to top


論文リストへ

 

Last modified on 07/14/2022 at 12:48:15 by Katsushi Furutani